Did you know that 2008-2010 XB and 1125 models as well as EBR 1190s have the quickshift function built in to them and that they are even wired for it? Take advantage of this fact and greatly modernize your bike with one of these plug-n-play units. Instead of reducing throttle and using the clutch during up-shifts, fuel and spark is momentarily cut allowing gear changes in a small fraction of a second, just like many modern sport bikes do right from the factory. Significantly reduces shifting time and all but eliminates miss-shifts and false neutrals, without putting additional strain on your drivetrain. A must-have for anyone that races, but you don't need to be a racer to enjoy this feature. All necessary hardware is included. No permanent modifications to the bike are required. Activation of the quickshifter function on Buell models is done using a BUELLtooth and the Ecmdroid application in less then a minute.
Radial Quickshifter sensor kit for Buell 1125 models. Installs in minutes without any permanent modifications and plugs into existing connector located behind front pulley cover. Adjustable sensitivity. Includes stainless steel hardware. Requires activation of QS feature using BUELLtooth dongle and the free Ecmdroid App.
Racers rejoice! This affordable, yet robust kit converts your bike to reverse (GP) shift pattern. Includes a plug-n-play quickshift sensor which allows the use of the quickshift function that is built into 1125* and 1190 ECMs. All hardware is included. Requires the use of stock toe peg.
*1125 models require the activation of QS using a BUELLtooth dongle.
EBR 1190 owners finally get to take advantage of the quickshift function built into their ECMs, without breaking the bank. This standard shift pattern kit easily install in minutes and is plug-n-play using an existing connector. Don't let the "other guys" have a technical advantage over you. Get the most fun and performance available for the money. Comes will all mounting hardware, uses stock toe peg.
Our exclusive XB Quickshift system utilizes a proximity sensor and magnetic target which provides a robust, contact free and cost effective solution for those wanting to take advantage of the Quickshifter feature built in to 2008 – 2010 ECMs, or use our QS module for 2003 - 2007 models (sold separately). This kit includes a plug and play sensor, stainless steel shift rod/target assembly and hardware. On 2008 - 2010 models this plugs into the existing sidestand connector located inside the left air scoop and the feature is activated using a Buelltooth ECM interface.
How it works: As an Up-shift is made, the magnetic target is moved closer to the proximity sensor. This creates a “switch” which is the signal for the ECM to activate the quickshift feature, allowing the rider to shift without use of clutch or reduction of throttle.
*Requires use of stock shift rod ends
*Not compatible with Ulysses models
2003 - 2007 XB Owners: Now you can add the Quickshift feature with our exclusive plug and play Quickshift module and harness!
Add Quickshift to your 2003 - 2007 XB motorcycle with this plug and play module and harness developed by Buelltooth. Does not require any cutting of wires or programming of ECM. The digital QS Module has adjustable kill and delay times and fits neatly under your seat. Works with our exclusive XB Quickshift Sensor Kit (not included).